ข้อมูล roll forming Shelf Support Keel Roll Forming Machine For Z Beam Profile
BMS Racking Roll Forming System including Pallet rack roll forming machine/Metal panel rack roll forming machine/Support beam rack roll forming machine and so on.
Machine Description
1. Material:
1) Suitable Coil Thickness: 0.5-1.0mm;
2)Test material thickness:0.8mm
3)Feeding width:58mm
4) Suitable Raw Material: Q235 Galvanized steel sheet
2. Equipment composition
Hydraulic de-coiler 1 set Max. loading 3 Tons
Roll forming System 1 set
Hydraulic cutting device 1 set
PLC Electrical control system 1 set
Hydraulic system 1 set
Decoiler→Feeding And Leveling Device→Hydraulic Punching Hole Device →
Roll Forming System→Hydraulic Post Cutter→Exit Rack
(1) Hydraulic De-coiler
Single - head de-coiler, unilateral discharge
Use hydraulic tightening
Pressure internal intensify
Oil pump type: Vane pump
Max. loading weight: 5000Kg
Max. coiling diameter: 600mm
Working pressure: 10mpa
Max. coil ID range: 508±30mm
2)Feeding & Leveling Device
After uncoiling, the coil goes into the unit guide wheel (Adjustable left and right)
Shafts manufactured from 45# steel, Diameter=φ90mm, plated with hard chrome-coated, precision machined.
Levelling roller are on top two shafts and three shafts, totally five rollers in the following, surface quenching
3)Hydraulic Punching Hole
Pre-punching and Post cutting use the same hydraulic system
Working pressure: 0-16mpa
Mould material: Cr12Mov(=D2 steel), Quenching to 58-62°
Hydraulic station power: 7.5KW
4)Roll Forming System
Main motor: 5.5KW
Drive: Motor drive
Shafts diameter: ￠65mm,
Material 45# quenching and tempering treatment
Roller material: 40Cr Steel, CNC lathes, Heat Treatment, hard Chrome Coated
with thickness 0.04mm, surface with mirror treatment(for longer life and anti-rust)
Stations: 8 stations
The unit adopts frequency conversion 12-18m/min(excluding punching time)
Computer PLC control, operation panel with touch screen display
5)Hydraulic Cutting Device
Hydraulic cutting for Z Beam profile, one for C profile, manual adjusting
Blade material: Cr12Mov quenching to 58°-62°
Cylinder brand: Huade
Working pressure:30mpa
Working travel: 80mm
6)PLC Electrical control system
| Item No. | Main Part | Brand | Others |
| 1 | PLC | Schneider Electric | French brand |
| 2 | Inverter | Schneider Electric | French brand |
| 3 | 7-Inch Color Touch Screen | Schneider Electric | French brand |
| 4 | Encoder | Omron | Japan brand |
| 5 | Air Switch | LG-LS | Korea brand |
7)Finished products
Packing & Delivery
The main machine is directly loaded into the container, and the electrical components are wrapped with plastic film.
Payment terms and after-sale service:
1) FOB Xiamen or CIF your requirement port or L/C.
2) Payment: 30% T/T deposit, and pay the balance before shipping.
3) Delivery time: 45working days.
4) Warranty period: 24-month limited warranty from the date of delivery. The shipping cost of parts to be replaced during the warranty period must be borne by the customer.
5) Spare parts: bearings, buttons, chains, solenoid valves, protective tubes, etc.
6) Installation and training:
1. If the buyer visits our factory and inspects the machine, we will teach you how to install and use the machine and train the workers /technicians face to face.
2. Without access, we will send you a user manual or video to teach you how to install and operate.
3. Installation cost:
The buyer shall pay the installation fee ($ 100 per person per day). Before the seller's technicians go to the buyer's factory, wire transfer to the account designated by the seller. The buyer pays the seller's technical staff to travel outside of China, including round-trip airfare, accommodation and food expenses, providing transportation from the hotel where they live to the workplaces, necessary communications and insurance, etc.
If you have any other questions about our machine, please feel free to contact me, thank you!
Product Tags:
|
|
Fast Shelf Support Keel Racking Roll Forming Machine For Z Beam Profile Images
|
